Your Cart is Empty
Car Diffuser
Essential oils capture the "essence" of a plant through the distillation of mechanical pressing. Essentially, these oils are concentrated extracts that retain, or magnify the fragrance and effect of their source.
HR-AD-AA2-ADA6L
AA Power II Fast Wireless Charging Auto-Clamp & Auto-Alignment Car Mount DSH Base-ADA6L for Audi A6L/7I / RS6/7 / S6/7
€39,95
Special design for:
Audi A6L (2019-2022)
Audi A7 (2019-2022)
Audi A7I (2019-2022)
Audi RS6 (2021-2022)
Audi RS7 (2021)
Audi S6 (2019-2021)
Audi S7 (2020-2021)
Description:
CAPDASE AA Power II Mount - Fast Wireless Charging Auto-Clamp & Auto-Alignment Car Mount focuses on the Innovative and Smarter mounting solution. It is equipped with cutting-edge Auto-sensor technology, to detect and determine the best wireless charging overlay position through the current and voltage generated by the transmitting coil of the holder and the receiving coil of the Smartphone. The operation is to perform identification and positioning by automatically adjusting the length of the supporting leg on the bottom (with beep adjustment prompt sound); to find out the Maximum current position, achieving the optimal charging performance, then tightly clamps the Smartphone automatically once aligned correctly. It is the ultimate gear for different Smartphone models for drivers and passengers.
It is equipped with a Qi Standard transmitter and delivers 5W/ 7.5W/ 10W/ 15W power segment, allows fast charging wirelessly with Qi-enabled smartphone models. The intelligent-clamps locking system is engineered with a Coil inductor. The clamps will open up automatically when starting the car engine, and effortlessly self-releasing by touching the top sensing button even car engine is off.
It is also engineered with an Automatic Alignment Memory System. It will remember the best-aligned coil’s positions when putting the same Smartphone into the holder the next time you use it. There is no need to process the alignment again, makes it compatible with any smartphone size even wearing its protective case. It is flexible to adjust the display at an optimal viewing angle. With full access to device controls and ports, either in landscape or portrait viewing, for convenient navigating, calling, audio, video, and internet browsing while enjoy wirelessly & fast charging at the same time. It is a perfect companion in the vehicle and safe & fast charging while driving.
DSH Base - ADA6L
Compatible with :
Audi A6L (2019-2022)
Audi A7 (2019-2022)
Audi A7I (2019-2022)
Audi RS6 (2021-2022)
Audi RS7 (2021)
Audi S6 (2019-2021)
Audi S7 (2020-2021)
Position:
Audi A6L (2019-2022)
Audi A7 (2019-2022)
Audi A7I (2019-2022)
Audi RS6 (2021-2022)
Audi RS7 (2021)
Audi S6 (2019-2021)
Audi S7 (2020-2021)
Description:
CAPDASE AA Power II Mount - Fast Wireless Charging Auto-Clamp & Auto-Alignment Car Mount focuses on the Innovative and Smarter mounting solution. It is equipped with cutting-edge Auto-sensor technology, to detect and determine the best wireless charging overlay position through the current and voltage generated by the transmitting coil of the holder and the receiving coil of the Smartphone. The operation is to perform identification and positioning by automatically adjusting the length of the supporting leg on the bottom (with beep adjustment prompt sound); to find out the Maximum current position, achieving the optimal charging performance, then tightly clamps the Smartphone automatically once aligned correctly. It is the ultimate gear for different Smartphone models for drivers and passengers.
It is equipped with a Qi Standard transmitter and delivers 5W/ 7.5W/ 10W/ 15W power segment, allows fast charging wirelessly with Qi-enabled smartphone models. The intelligent-clamps locking system is engineered with a Coil inductor. The clamps will open up automatically when starting the car engine, and effortlessly self-releasing by touching the top sensing button even car engine is off.
It is also engineered with an Automatic Alignment Memory System. It will remember the best-aligned coil’s positions when putting the same Smartphone into the holder the next time you use it. There is no need to process the alignment again, makes it compatible with any smartphone size even wearing its protective case. It is flexible to adjust the display at an optimal viewing angle. With full access to device controls and ports, either in landscape or portrait viewing, for convenient navigating, calling, audio, video, and internet browsing while enjoy wirelessly & fast charging at the same time. It is a perfect companion in the vehicle and safe & fast charging while driving.
DSH Base - ADA6L
Compatible with :
Audi A6L (2019-2022)
Audi A7 (2019-2022)
Audi A7I (2019-2022)
Audi RS6 (2021-2022)
Audi RS7 (2021)
Audi S6 (2019-2021)
Audi S7 (2020-2021)
Position:
- Hook on the rolling wheel between 2 air vent on the front desk
AA Power II
• A satisfying visual sense of technology and design outlook with compact size
• Automatic identification with both coil location of Smartphone & Holder
• Auto-adjusting the supporting legs when performing the alignment
• To maximize charging efficiency once aligned correctly & tightly clamping Smartphone automatically
• Built-in Supercapacitor, the clamp is self-releasing by touching the top sensing button on the back even the engine is off
• Equipped with advanced torque stepping motor, More stable and Noise reduction with Anti-shake from the clamp
• Automatic Alignment Memory System, remembers the coil position of Smartphone model aligned from last time
• Delivers 5W/ 7.5W/ 10W/ 15W power segment, allows fast charging wirelessly compatible with Qi-enabled smartphone models
Feature
• Anti-slip silicone mat pads on both clamps and supporting legs prevent scratching the device.
• Prevent over-voltage, current, temperature, and short-circuit protection.
• A built-in supercapacitor can also release the clamp even when the car engine is turned off.
Notes
Supports 7.5W fast-charging Qi-standard iPhone 12, 13, 14 requirement.
Gentle reminder:
• Please be sure the AA Power holder is connected with the power source before using it.
• The clamp operates by a button located at both side.
• Cannot charge if the Smart device is worn with a metal case or the case is thicker than 3 mm.
• The wireless charging and will not work with any non-Qi-enabled smartphone.
Wireless charging notes:
• It uses electromagnetic fields to transfer power from a transmitting source *, to a receiving device * for charging the device’s battery wirelessly.
• Transmitting source: AA Power II holder.
• Receiving device: Qi-enabled Smartphones.
• Best performance: 3-5mm
• Standard: Qi Standard
Fast charging notes:
• Qi-enabled devices which are not supported fast charging will be powered at a standard charging speed.
• Required a separately sold QC 3.0 Car charger or Car charger higher than 18W to support fast charging.
• Attention to the power output of the charging source of the car charger will affect the charging speed performance.
Specification
Input: DC 12V/1.5A; 9V/2A; 5V/2A
Output: 5W / 7.5W / 10W / 15W
Induction distance: ＜6mm
Efficiency: 5W≤75%, 7.5W≤76%, 10W≤80%, 15W≤83%
Input port: USB-C
Product Dimension: 117*69*7mm
Product weight: 178g
Clamps width: 58mm ~ 86mm
Material: Acrylic + PC + ABS
Applicable size: 4.7-6.8 inches
USB-C To USB-A Cable included.