Your Cart is Empty
Car Diffuser
Essential oils capture the "essence" of a plant through the distillation of mechanical pressing. Essentially, these oils are concentrated extracts that retain, or magnify the fragrance and effect of their source.
HR-AD-ACM2-ADA6L
A-CM Power II Ceramic Cooling Fast Wireless Charging Auto-Clamp Car Mount DSH Base-ADA6L for Audi A6L/7I / RS6/7 / S6/7
$365.00
Special design for:
Audi A6L (2019-2022)
Audi A7 (2019-2022)
Audi A7I (2019-2022)
Audi RS6 (2021-2022)
Audi RS7 (2021)
Audi S6 (2019-2021)
Audi S7 (2020-2021)
Description:
A-CM Power II Mount focuses on the Innovative and Smarter mounting solution. It is equipped with a Qi Standard transmitter. It delivers a 5W/ 7.5W/ 10W/ 15W power segment, allows fast charging wirelessly, and is compatible with Qi-enabled Smartphone models. The intelligent-clamps locking system is engineered with an inductor that will automatically grip the device securely in place and effortlessly self-releasing. Built-in advanced Electro-Ceramic Cooling Module with Smart Semiconductor cooling plate and cooling fan. It will absorb the heat and dissipate the heat during the wireless charging period, protect the phone's safety and improve the wireless charging efficiency. It also embeds a stepper motor to minimize the noise.
DSH Base - ADA6L
Compatible with :
Audi A6L (2019-2022)
Audi A7 (2019-2022)
Audi A7I (2019-2022)
Audi RS6 (2021-2022)
Audi RS7 (2021)
Audi S6 (2019-2021)
Audi S7 (2020-2021)
Position:
Audi A6L (2019-2022)
Audi A7 (2019-2022)
Audi A7I (2019-2022)
Audi RS6 (2021-2022)
Audi RS7 (2021)
Audi S6 (2019-2021)
Audi S7 (2020-2021)
Description:
A-CM Power II Mount focuses on the Innovative and Smarter mounting solution. It is equipped with a Qi Standard transmitter. It delivers a 5W/ 7.5W/ 10W/ 15W power segment, allows fast charging wirelessly, and is compatible with Qi-enabled Smartphone models. The intelligent-clamps locking system is engineered with an inductor that will automatically grip the device securely in place and effortlessly self-releasing. Built-in advanced Electro-Ceramic Cooling Module with Smart Semiconductor cooling plate and cooling fan. It will absorb the heat and dissipate the heat during the wireless charging period, protect the phone's safety and improve the wireless charging efficiency. It also embeds a stepper motor to minimize the noise.
DSH Base - ADA6L
Compatible with :
Audi A6L (2019-2022)
Audi A7 (2019-2022)
Audi A7I (2019-2022)
Audi RS6 (2021-2022)
Audi RS7 (2021)
Audi S6 (2019-2021)
Audi S7 (2020-2021)
Position:
- Hook on the rolling wheel between 2 air vent on the front desk
Advanced Electro-Ceramic Cooling Module
Advanced Electro-Ceramic Cooling Module with Smart Semiconductor cooling plate and cooling fan can dramatically decrease the temperature when it is wireless charging. You can actually feel the blizzing cold with your finger!
A-CM Power II holder
• A sleek cradle design with a Fast + Wireless transmitter
• Fully compatible with Qi Standard enabled Smartphones
• With Dual Wireless charging coils
• Compatible with Foldable (folded state) & Flippable phones (both flipped open and close)
• Built-in advanced Electro-Ceramic Cooling Module
• Dramatically decrease the temperature when it is wireless charging
• Innovative and Smart locking system engineered with the inductor
• Automatic gripping your smartphone securely in place and effortless self-release
• Minimizing unpleasant noise by the equipped stepper motor
• Touch at either side to turn on the automated side-clamps mechanism
• Extendable leg compatible with various device's sizes ensures optimal wireless transfer
• Prevent over-voltage, current, temperature, and short-circuit protection
Fast Wireless Charging
It delivers a 5W, 7.5W, 10W, and 15W power segment, allows fast charging wirelessly, and is compatible with Qi-enabled Smartphone models.
With Dual Wireless Charging Coils
Compatible with Foldable (folded state) & Flippable phones (both flipped open and close)
Wide Clamp Size
From 63mm up to 90mm wide, it is compatitble to almost all phone models.
Touch at either side to turn on the automated side-clamps mechanism
Extendable leg compatible with various device's sizes ensures optimal wireless transfer
Notes:
• When NTC (Thermistor) detects the ambient temperature is below 20 degrees, the cooling fan and the cooling plate will stop operating until the temperature rises again
• The cooling fan will stop when the smartphone is removed
• The cooling plate and cooling fan only work when the input power is above 9V
• It is recommended to use a Smartphone case with a thickness of less than 2mm
• It will affect the cooling function of the cooling plate if the Smartphone case is thicker than 2mm
Gentle reminder:
• Please be sure the A-CM power II mount is connected with the power source before using
• Clamp operate by a soft-touch inductive button located at both sides
• Cannot charge if the Smart device is worn with a metal case or the case is thicker than 3 mm
• The wireless charging and cooling fan will not work with any non-QI enabled smartphone
Wireless charging notes:
It uses electromagnetic fields to transfer power from a transmitting source *, to a receiving device * for charging the device’s battery wirelessly
Transmitting source: A-CM Power II holder
Receiving device: Qi-enabled Smartphones
Fast charging notes:
Qi-enabled devices which do not support fast charging will be powered at a standard charging speed
Required a separately sold QC 3.0 Car charger or Car charger higher than 15W to support fast charging
Attention to the power output of the charging source of the car charger will affect the charging speed performance
Specification:
Input: DC 12V/2~3A ; 9V/2~3A
Output: 5W / 7.5W / 10W /
15W
Transmission Distance: ≤10mm
Efficiency: ≥ 80%
Recharge port: USB-C
Dimension: Ø72.5*134.5* 75 mm
Clamps width: 53mm – 90mm
Product material: ABS+Tempered
Glass
**Best performance: 3.5mm : Standard: Qi Standard
USB-C To USB-A Cable included